User Manual

3-3
Chapter 3: BIOS setup
All-in-One Chassis
Allows you to select All-in-One (AiO) Chassis (if applicable) for simplied AiO
conguration. Conguration options: [None] [1920*1080 LVDS1] [1920*1080
LVDS2] [1920*1080 LVDS3] [1600*900 LVDS4]
• Be cautious when selecting AiO chassis. Incorrect selection of AiO chassis
can cause incorrect operation or potential damage to AiO chassis hardware.
• The following items appear only when you set All-in-One Chassis to [None].
EDID Data Source
Conguration options: [Pre-Dened] [Flat Panel Display]
The following item appears when you set EDID Data Source to [Pre-Dened].
LFP Panel Type
Allows you to select LFP panel used by Internal Graphics Device.
Conguration options: [VBIOS Default] [640x480] [800x600] [1024x768]
[1280x1024] [1400x1050 LVDS1] [1400x1050 LVDS2] [1600x1200]
[1366x768] [1680x1050] [1920x1200] [1440x900] [1600x900] [1024x768]
[1280x800] [1920x1080] [2048x1536]
Inverter Polarity
Conguration options: [Normal] [Inverted]
Channel Select
Conguration options: [Dual Channel] [Single Channel]
Mode Select
Confuguration options: [JEIDA] [VESA 6bit] [VESA 8bit] [VESA 10bit]
DIGON enable to LVDS_ON enable(T2)
Conguration options: [0] ~[50]
LVDS_ON enable to BLON enable (T3)
Conguration options: [0] ~[1023]
BLON disable to LVDS_ON disable (T4)
Conguration options: [0] ~[1023]
LVDS_ON disable to DIGON disbale (T5)
Conguration options: [0] ~[50]
Completion of power down to power up (T7)
Conguration options: [0] ~[1023]
VARY_BL enable to BL_EN enable (T9)
Conguration options: [0] ~[1023]