User’s Manual

3-18
H310I-IM-A R2.0
3.5 Boot menu
The Boot menu items allow you to change the system boot options.
Fast Boot [Enabled]
[Enabled] Select to accelerate the boot speed.
[Disabled] Select to go back to normal boot speed.
The following item appears only when you set Fast Boot to [Enabled].
Next Boot after AC Power Loss [Normal Boot]
[Normal Boot] Returns to normal boot on the next boot after AC power loss.
[Fast Boot] Accelerates the boot speed on the next boot after AC power loss.
3.5.1 Boot Configuration
Boot Logo Display [Auto]
[Auto] Adjusts logo automatically based on Windows
®
display
requrements.
[Full Screen] Maximize the boot logo size.
[Disabled] Hide the logo during POST.
POST Delay Time [3 sec]
This item appears only when you set Boot Logo Display to [Auto] and [Full
Screen] This item allows you to select the desired additional POST waiting
time to easily enter the BIOS setup. You can only execute the POST delay
time during Normal Boot. The values range from 0 to 10 seconds.
This feature will only work under normal boot.
Post Report [5 sec]
This item appears only when you set Boot Logo Display to [Disabled]. This
item allows you to select a desired post report waiting time. Conguration
options: [1 sec] ~ [10 sec] [Until Press ESC].
Bootup NumLock State [Enabled]
This item allows you to enable or disable power-on state of the NumLock.
Conguration options: [Disabled] [Enabled]
Wait for ‘F1’ If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed
when error occurs. Conguration options: [Disabled] [Enabled]