User’s Manual

3-12
H310I-IM-A R2.0
3.3.9 APM Configuration
ErP Ready [Disabled]
Allows BIOS to switch off some power at S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options will be switched off.
Conguration options: [Enable(S4+S5)] [Enable(S5)] [Disabled]
Restore AC Power Loss [Power Off]
[Power On] The system goes into on state after an AC power loss.
[Power Off] The system goes into off state after an AC power loss.
[Last State] The system goes into either off or on state, whatever the system
state was before the AC power loss.
Power On By PCI-E [Disabled]
Allows you to enable or disable the Wake-on-LAN function of the onboard LAN
controller or other installed PCIe LAN cards. Conguration options: [Disabled]
[Enabled]
Power On By RTC [Disabled]
Allows you to enable or disable the RTC (Real-Time Clock) to generate a wake
event and congure the RTC alarm date. When enabled, you can set the days,
hours, minutes, or seconds to schedule an RTC alarm date. Conguration options:
[Disabled] [Enabled]
CEC Ready [Disabled]
Enable this item to allow your system to comply with CEC (California Energy
Commission) regulations to save some power at S0 state. Conguration options:
[Enable] [Disabled]
3.3.10 USB Configuration
The USB Devices item lists auto-detected values. If no USB device is detected,
the item shows None.
Legacy USB Support [Enabled]
[Enabled] Enables the support for USB devices on legacy OS.
[Disabled] USB devices are only available when running BIOS Setup.
[Auto] Allows the system to detect the presence of USB devices
at startup. If detected, the USB controller legacy mode is
enabled. If no USB device is detected, the legacy USB support
is disabled.
USB Keyboard and Mouse Simulator [Disabled]
Enable this item to simulate USB keyboard and mouse to PS/2 module in
Windows
®
7. Ensure that you have installed the USB driver in your system before
you disable this item. Conguration options: [Enable] [Disabled]