User’s Manual

3-11
Chapter 3: BIOS setup
MSATA_MPCIE Configuration [Auto]
[Auto] Auto-detects the device mode.
[MSATA Mode] Only supports MSATA devices.
[MPCIE Mode] Only supports MPCIE devices.
Intel LAN1 Controller [Enabled]
[Enabled] Enables the Intel LAN controller 1.
[Disabled] Disables the controller.
Intel LAN1 PXE OPROM [Disabled]
This item appears only when you set the previous item to [Enabled] and allows
you to enable or disable the PXE Option ROM of the Intel LAN controller 1.
Conguration options: [Disabled] [Enabled]
Serial Port Configuration
The sub-items in this menu allow you to set the serial port conguration.
Serial Port 1 [Enabled]
Allows you to enable or disable the serial port (COM) 1.Conguration options:
[Disabled] [Enabled]
Device Mode [RS232]
Allows you to select the Serial Port 1 mode. Conguration options: [RS232] [RS422]
[RS485]
Serial Port 2 [Enabled]
Allows you to enable or disable the serial port (COM) 2.Conguration options:
[Disabled] [Enabled]
Device Mode [RS232]
Allows you to select the Serial Port 2 mode. Conguration options: [RS232] [RS422]
[RS485]
Serial Port 3~6 [Enabled]
Allows you to enable or disable the serial port (COM) 3~6.Conguration
options: [Disabled] [Enabled]
Dynamic Digital IO
The items listed in this screen congure Digital IO settings.
DIO 0~7 [Input]
Conguration options: [Input] [Output]
The following item appears only when you set DIO 0~7 to [Output].
Output Level [H]
Conguration options: [H] [L]