User’s Manual

3-8
H310I-IM-A R2.0
Memory Configuration
Memory Remap [Enabled]
Allows you to enable or disable remapping the memory above 4GB.
Conguration options: [Disabled] [Enabled]
3.3.4 PCH Configuration
PCI Express Configuration
PCIe Speed [Auto]
Allows you to congure the PCIe speed. Conguration options: [Auto] [Gen1]
[Gen2]
IOAPIC 24-119 Entries [Enabled]
Sets to whether allow IOAPIC 24-119 Entries to expand to PIRQI-PIRQX.
Conguration options: [Disabled] [Enabled]
3.3.5 PCH Storage Configuration
While entering Setup, the BIOS automatically detects the presence of SATA
devices. The SATA Port items show Empty if no SATA device is installed to the
corresponding SATA port.
SATA Controller(s) [Enabled]
Enables or disables onboard the SATA device. Conguration options: [Disabled]
[Enabled]
The following items appear when you set SATA Controller(s) to [Enabled].
Aggressive LPM Support [Disabled]
This item is designed for LPM (link power management) support with a better
energy saving conditions. When disabled, the hot plug function of SATA ports are
disabled. Conguration options: [Disabled] [Enabled]
Smart Self Test [Enabled]
Allows you to enable or disable the SMART Self Test on all HDDs during POST.
Conguration options: [Disabled] [Enabled]
SATA6G_1~2(Gray) [Enabled]
Allow you to enable or disable the SATA6G_1~2 port. Conguration options:
[Disabled] [Enabled]
SATA6G_1~2 Hot Plug [Disabled]
These items allow you to enable or disable SATA Hot Plug Support. Conguration
options: [Disabled] [Enabled]
M.2(SOCKET3) [Enabled]
Allow you to enable or disable the M.2(SOCKET3). Conguration options:
[Disabled] [Enabled]