User’s Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 Platform Misc Configuration
- 3.3.2 CPU Configuration
- 3.3.3 System Agent (SA) Configuration
- 3.3.4 PCH Configuration
- 3.3.5 PCH Storage Configuration
- 3.3.7 LVDS Configuration
- 3.3.8 Onboard Devices Configuration
- 3.3.9 APM Configuration
- 3.3.10 USB Configuration
- 3.3.11 Network Stack Configuration
- 3.3.12 HDD/SSD SMART Information
- 3.4 Monitor menu
- 3.5 Boot menu
- 3.6 Tool menu
- 3.7 Exit menu
- BIOS setup
- Appendix
H310I-IM-A R2.0
2-16
CAUTION! Do not forget to connect the fan cables to the fan connectors.
Insufcient air ow inside the system may damage the motherboard
components. These are not jumpers! Do not place jumper caps on the fan
connectors!
5. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring
that the black wire of each cable matches the ground pin of the connector.
H310I-IM-A R2.0 Fan connectors
CHA_FAN
CPU_FAN
CPU FAN PWM
CPU FAN IN
CPU FAN PWR
GND
CHA FAN PWM
CHA FAN IN
CHA FAN PWR
GND
6. TPM connector (14-1 pin TPM)
This connector supports a Trusted Platform Module (TPM) system, which can
securely store keys, digital certicates, passwords, and data. A TPM system
also helps enhance network security, protects digital identities, and ensures
platform integrity.
H310I-IM-A R2.0 TPM connector
PIN 1
SPI HOLD#
SPI MISO
SPI CS#
+3V_SPI
PLTRST#
+3VSB
SPI MOSI
SPI CLK
GND
SPI FLASH WP#
SPI TPM CS#
SPI TPM IRQ#
TPM