User’s Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 Platform Misc Configuration
- 3.3.2 CPU Configuration
- 3.3.3 System Agent (SA) Configuration
- 3.3.4 PCH Configuration
- 3.3.5 PCH Storage Configuration
- 3.3.7 LVDS Configuration
- 3.3.8 Onboard Devices Configuration
- 3.3.9 APM Configuration
- 3.3.10 USB Configuration
- 3.3.11 Network Stack Configuration
- 3.3.12 HDD/SSD SMART Information
- 3.4 Monitor menu
- 3.5 Boot menu
- 3.6 Tool menu
- 3.7 Exit menu
- BIOS setup
- Appendix
H310I-IM-A R2.0
2-14
2.6.2 Internal connectors
1. LCD panel monitor switch header (2-pin PANEL_SW)
This 2-pin header is for connecting a monitor switch that can turn off the LCD
panel display backlight.
H310I-IM-A R2.0 Display panel power button
PIN 1
GND
MON_SW#
PANEL_SW
2. USB 3.1 Gen 1 connector (20-1 pin U31G1_12)
Connect a USB 3.1 Gen 1 module to this connector for additional USB 3.1
Gen 1 front or rear panel ports. This connector complies with USB 3.1 Gen
1 specications and provides faster data transfer speeds of up to 5 Gbps,
faster charging time for USB-chargeable devices, optimized power efciency,
and backward compatibility with USB 2.0.
H310I-IM-A R2.0 USB 3.1 Gen1 connector
U31G1_12
USB3+5V
IntA_P1_SSRX-
IntA_P1_SSRX+
GND
IntA_P1_SSTX-
IntA_P1_SSTX+
GND
IntA_P1_D-
IntA_P1_D+
GND
PIN 1
USB3+5V
IntA_P2_SSRX-
IntA_P2_SSRX+
GND
IntA_P2_SSTX-
IntA_P2_SSTX+
GND
IntA_P2_D-
IntA_P2_D+