User’s Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 Platform Misc Configuration
- 3.3.2 CPU Configuration
- 3.3.3 System Agent (SA) Configuration
- 3.3.4 PCH Configuration
- 3.3.5 PCH Storage Configuration
- 3.3.7 LVDS Configuration
- 3.3.8 Onboard Devices Configuration
- 3.3.9 APM Configuration
- 3.3.10 USB Configuration
- 3.3.11 Network Stack Configuration
- 3.3.12 HDD/SSD SMART Information
- 3.4 Monitor menu
- 3.5 Boot menu
- 3.6 Tool menu
- 3.7 Exit menu
- BIOS setup
- Appendix
H310I-IM-A R2.0
2-12
5. AT/ATX mode selection (3-pin AT_ATX_SEL)
Pins
1-2 (Default) ATX mode
2-3 AT mode
H310I-IM-A R2.0 AT/ATX mode selection
21 2 3
ATX mode
(Default)
AT mode
AT_ATX_SEL
2.6 Connectors
2.6.1 Rear panel connectors
6
3
4
5
1 2
1
7
LAN port
Speed
LED
Activity Link
LED
Activity/Link LED Speed LED
Status Description Status Description
Off No link OFF 10Mbps connection
Orange Linked ORANGE 100Mbps connection
Orange (Blinking) Data activity GREEN 1Gbps connection
Orange (Blinking
then steady)
Ready to wake up
from S5 mode
1. Serial ports (COM). These ports connect a modem, or other devices that
conform with serial specication.
2. DisplayPorts. These ports are for DisplayPort-compatible devices.
3. LAN (RJ-45) ports. These ports allow Gigabit connection to a Local Area
Network (LAN) through a network hub.
LAN port LED indications