User’s Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 Platform Misc Configuration
- 3.3.2 CPU Configuration
- 3.3.3 System Agent (SA) Configuration
- 3.3.4 PCH Configuration
- 3.3.5 PCH Storage Configuration
- 3.3.7 LVDS Configuration
- 3.3.8 Onboard Devices Configuration
- 3.3.9 APM Configuration
- 3.3.10 USB Configuration
- 3.3.11 Network Stack Configuration
- 3.3.12 HDD/SSD SMART Information
- 3.4 Monitor menu
- 3.5 Boot menu
- 3.6 Tool menu
- 3.7 Exit menu
- BIOS setup
- Appendix
H310I-IM-A R2.0
2-10
2.5 Jumpers
1. Clear RTC RAM (2-pin CLRTC)
This header allows you to clear the CMOS RTC RAM data of the system
setup information such as date, time, and system passwords.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Use a metal object such as a screwdriver to short the two pins.
3. Plug the power cord and turn ON the computer.
4. Hold down the <Del> key during the boot process and enter BIOS setup
to re-enter data.
NOTE: If the steps above do not help, remove the onboard battery and move
the jumper again to clear the CMOS RTC RAM data. After clearing the CMOS,
reinstall the battery.
2. Display panel backlight power selection (3-pin BLKT_PWR_SEL)
Pins
12V (Default) 1-2
19V 2-3
H310I-IM-A R2.0 Clear RTC RAM
CLRTC
+3V_BAT
GND
PIN 1
1 2
2 3
12V
(Default)
19V
BLKT_PWR_SEL
H310I-IM-A R2.0 Display panel
backlight power selection