User Manual

3-37
Chapter 3: BIOS setup
Boot Override
These items displays the available devices. The number of device items that
appears on the screen depends on the number of devices installed in the system.
Click an item to start booting from the selected device.
3.7 Tool menu
The Tool menu items allow you to congure options for special functions. Select an
item then press <Enter> to display the submenu.
ASUS EZ Flash 3 Utility
This item allows you to run ASUS EZ Flash 3 utility. When you press <Enter>, a
conrmation message appears. Use the left/right arrow key to select between [Yes]
or [No], then press <Enter> to conrm your choice.
ASUS SPD Information
This item allows you to view the DRAM SPD information.
Event Log
A built-in event log enables easier troubleshooting by capturing useful system
information.
3.8 Exit menu
The Exit menu items allow you to load the optimal default values for the BIOS
items, and save or discard your changes to the BIOS items. You can access the
EZ Mode from the Exit menu.
Load Optimized Defaults
This option allows you to load the default values for each of the parameters on the
Setup menus. When you select this option or if you press <F5>, a conrmation
window appears. Select OK to load the default values.
Save Changes & Reset
Once you are nished making your selections, choose this option from the Exit
menu to ensure the values you selected are saved. When you select this option or
if you press <F10>, a conrmation window appears. Select OK to save changes
and exit.