User Manual

3-28
H310A-EM-A
NOTE: The following two items appear only when you set the previous item to
[Enabled].
Ipv4 PXE Support [Enabled]
This item allows user to disable or enable the Ipv4 PXE Boot support.
Conguration options: [Disabled] [Enabled]
Ipv6 PXE Support [Enabled]
This item allows user to disable or enable the Ipv6 PXE Boot support.
Conguration options: [Disabled] [Enabled]
3.4.13 HDD Secure Erase
This menu displays the HDDs that suppot Secure Erase function.
3.4.14 HDD/SSD SMART Information
This menu displays the SMART information of the connected devices.
3.5 Monitor menu
The Monitor menu displays the system temperature/power status, and allows you
to change the fan settings.
CPU / MotherBoard Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the CPU/
motherboard temperatures. Select Ignore if you do not wish to display the
detected temperature.
CPU / Chassis Fan Speed [xxxx RPM] or [Ignore] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU /
chassis fan speeds in rotations per minute (RPM). If the fan is not connected to the
motherboard, the eld shows N/A. Select Ignore if you do not wish to display the
detected speed.
CPU Core Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators. Select Ignore if you do not want to detect this item.
Q-Fan Conguration
Q-Fan Tuning
Click [OK] button to detect the lowest speed and congure the minimum duty circle
for each fan. Do not shut down or reset your system during the tuning progress.
Conguration options: [Ok] [Cancel]