User Manual

3-23
Chapter 3: BIOS setup
COM2 Control [RS232]
Allows you to select COM2 mode. Conguration options: [RS422] [RS232]
[RS485]
Serial Port 3 Conguration
The sub-items in this menu allow you to set the serial port conguration.
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM). Conguration options:
[Disabled] [Enabled]
Serial Port 4 Conguration
The sub-items in this menu allow you to set the serial port conguration.
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM). Conguration options:
[Disabled] [Enabled]
Serial Port 5 Conguration
The sub-items in this menu allow you to set the serial port conguration.
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM). Conguration options:
[Disabled] [Enabled]
Serial Port 6 Conguration
The sub-items in this menu allow you to set the serial port conguration.
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM). Conguration options:
[Disabled] [Enabled]
Parallel Port Conguration
Allows you to set parameters of Parallel Port.
Parallel Port [Enabled]
Allows you to enable or disable the parallel port (LPT/LPTE).
Conguration options: [Disabled] [Enabled]
NOTE: The following item appears only when you set Parallel Port to [Enabled].
Change Settings [Auto]
Allows you to choose the setting for Super IO device.
Conguration options: [Auto] [IO=378h; IRQ=5] [IO=378h;
IRQ=5,6,7,9,10,11,12] [IO=278h; IRQ=5,6,7,9,10,11,12] [IO=3BCh;
IRQ=5,6,7,9,10,11,12]