User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 Platform Misc Configuration
- 3.3.2 CPU Configuration
- 3.3.3 System Agent (SA) Configuration
- 3.3.4 PCH Configuration
- 3.3.5 PCH Storage Configuration
- 3.3.6 PCH-FW Configuration
- 3.3.7 LVDS Configuration
- 3.3.8 Onboard Devices Configuration
- 3.3.9 APM Configuration
- 3.3.10 Network Stack Configuration
- 3.3.11 HDD/SSD SMART Information
- 3.3.12 USB Configuration
- 3.4 Monitor
- 3.5 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
3-9
Chapter 3: BIOS setup
3.3.7 LVDS Configuration
All-in-One Chassis
Allows you to select All-in-One (AiO) Chassis (if applicable) for simplied AiO
conguration. Conguration options: [None] [ESC (21.5\x22] [Mitac Maestro (21.5\
x22)] [Gigabyte (18.5\x22)] [LP-215x (21.5\x22)] [Wibtek A21 (21.5\x22)] [Wibtek
A23 (23.6\x22)] [Jumper Sail (21.5\x22)] [Pixxo HP-A206D (21.5\x22)] [22AM33NB
(21.5\x22)] [3nod (21.5\x22)] [AUO (19.5\x22)]
Be cautious when selecting AiO chassis. Incorrect selection of AiO chassis can
cause incorrect operation or potential damage to AiO chassis hardware.
EDID Data Source
Conguration options: [Pre-dened] [Flat Panel Display]
The following item appears when you set All-in-One Chassis to options except
[None] or EDID Data Source to [Pre-Defined].
Pre-Defined LVDS Panel Type
Allows you to select LFP panel used by Internal Graphics Device.
Conguration options: [Default] [640x480] [800x600] [1024x768] [1280x1024]
[1400x1050(RB) LVDS1] [1400x1050 LVDS2] [1600x1200 LVDS] [1366x768
LVDS] [1680x1050] [1920x1200] [1440x900 LVDS] [1600x900 LVDS]
[1024x768 LVDS2] [1280x800] [1920x1080 LVDS] [2048x1536 LVDS]