User Manual

3-20
H110T-CM-A R2.0
Conguration options: [0 sec] - [10 sec]
This feature only works when set under normal boot.
The following item appears only when you set the Boot Logo Display to
[Disabled].
Post Report
This item allows you to select a desired POST report waiting time. Conguration
options: [1 sec] - [10 sec] [Until Press ESC]
Boot up NumLock State
This item allows you to enable or disable power-on state of the NumLock.
Conguration options: [Enabled] [Disabled]
Wait For ‘F1’ If Error
This item allows your system to wait for the <F1> key to be pressed when
error occurs. Conguration options: [Disabled] [Enabled]
Option ROM Messages
[Force BIOS] The third-party ROM messages will be forced to display
during the boot sequence.
[Keep Current] The third-party ROM messages will be displayed only if
the third-party manufacturer had set the add-on device to
do so.
CSM (Compatibility Support Module)
This item allows you to congure the CSM (Compatibility Support Module) items
to fully support the various VGA, bootable devices and add-on devices for better
compatibility.
Launch CSM
[Auto] The system will automatically detect the states of bootable
devices and the add-on devices for CSM support.
[Enabled] For better compatibility, enable the CSM to fully support
the non-UEFI driver add-on devices or the Windows
®
UEFI mode.
[Disabled] Disable the CSM to fully support the non-UEFI driver add-
on devices or the Windows
®
UEFI mode.
The following items appear only when you set the Launch CSM to [Enabled].
Boot Device Control
This item allows you to select the type of devices that you want to boot.
Conguration options: [UEFI and Legacy OPROM] [Legacy OPROM only] [UEFI
only]