User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 Platform Misc Configuration
- 3.3.2 CPU Configuration
- 3.3.3 System Agent (SA) Configuration
- 3.3.4 PCH Configuration
- 3.3.5 PCH Storage Configuration
- 3.3.6 PCH-FW Configuration
- 3.3.7 LVDS Configuration
- 3.3.8 Onboard Devices Configuration
- 3.3.9 APM Configuration
- 3.3.10 Network Stack Configuration
- 3.3.11 HDD/SSD SMART Information
- 3.3.12 USB Configuration
- 3.4 Monitor
- 3.5 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
3-12
H110T-CM-A R2.0
Realtek LAN Controller
[Enabled] Enables the Realtek LAN controller.
[Disabled] Disables the controller.
The following item appears only when you set Realtek LAN Controller to
[Enabled].
Realtek PXE OPROM
This item allows you to enable or disable the PXE Option ROM of the Realtek
PXE controller. Conguration options: [Disabled] [Enabled]
Intel LAN Controller
[Enabled] Enables the Intel LAN controller.
[Disabled] Disables the controller.
The following item appears only when you set Intel LAN Controller to
[Enabled].
Intel PXE OPROM
This item allows you to enable or disable the PXE Option ROM of the Intel
LAN controller. Conguration options: [Disabled] [Enabled]
Charging USB devices in Power State S5
[Enabled] Charges USB devices even when the system is in Power State S5.
[Disabled] Disables this function.
SerialPortConguration
Serial Port
Allows you to enable or disable the serial port (COM).Conguration options:
[On] [Off]
The following items appear only when you set Serial Port to [On].
Change Settings
Allows you to select an optimal setting for Super I/O devices. Conguration
options: [IO=3F8h; IRQ=4;] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h;
IRQ=3]