User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 Platform Misc Configuration
- 3.3.2 CPU Configuration
- 3.3.3 System Agent (SA) Configuration
- 3.3.4 PCH Configuration
- 3.3.5 PCH Storage Configuration
- 3.3.6 PCH-FW Configuration
- 3.3.7 LVDS Configuration
- 3.3.8 Onboard Devices Configuration
- 3.3.9 APM Configuration
- 3.3.10 Network Stack Configuration
- 3.3.11 HDD/SSD SMART Information
- 3.3.12 USB Configuration
- 3.4 Monitor
- 3.5 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
3-10
H110T-CM-A R2.0
Inverter Polarity
Conguration options: [Inverted] [Normal]
Backlight Control
Conguration options: [Dimmest] [Dimmer] [Dim] [Neutral] [Bright] [Brighter]
[Brightest]
Channel Select
Conguration options: [Dual Channel] [Single Channel]
Mode Select
Conguration options: [8bit Mode(JEIDA)] [8bit Mode(VESA)] [6bit
Mode(VESA and JEIDA)]
Panel Power Sequence Control
Conguration options: [Enable] [Disabled]
The following items appear when you set Panel Power Sequence Control to [Enable].
Panel_Vcc ON to Video_Data ON (T8)
Conguration options: [10 ms] [20 ms] [30 ms] [40 ms]
Video_Data ON to BKLT_PWM ON (T9)
Conguration options: [100 ms] [200 ms] [250 ms] [300 ms]
BKLT_PWM ON to BKLT_Enable ON (T10)
Conguration options: [10 ms] [15 ms] [20 ms] [25 ms]
BKLT_Enable OFF to BKLT_PWM OFF (T11)
Conguration options: [5 ms] [10 ms] [15 ms] [20 ms]
BKLT_PWM OFF to Video_Data OFF (T12)
Conguration options: [100 ms] [200 ms] [250 ms] [300 ms]