User's Manual

3-7
Chapter 3: BIOS setup
Serial Port 2 Configuration
Serial Port
Allows you to enable or disable the serial port (COM).Conguration options:
[Disabled] [Enabled]
The following item appears only when you set Serial Port to [Enabled].
COM2 Control
Allows you to select the COM2 mode. Conguration options: [RS232] [RS422]
[RS485]
Serial Port 3 Configuration
Serial Port
Allows you to enable or disable the serial port (COM).Conguration options:
[Disabled] [Enabled]
Serial Port 4 Configuration
Serial Port
Allows you to enable or disable the serial port (COM).Conguration options:
[Disabled] [Enabled]
Parallel Port Configuration
Parallel Port
Allows you to enable or disable the Parallel port (LPT/LPTE).Conguration
options: [Disabled] [Enabled]
The following items appear only when you set Parallel Port to [Enabled].
Change Settings [Auto]
This item allows you to select an optimal setting for Super I/O Device.
Conguration options: [Auto] [IO=378h; IRQ=5] [IO=378h; IRQ=5, 6, 7, 9, 10,
11, 12;] [IO=278h; IRQ=5, 6, 7, 9, 10, 11, 12;] [IO=3BCh; IRQ=5, 6, 7, 9, 10,
11, 12;]
Mode [RS232]
Allows you to select the Parallel Port mode. Conguration options: [STD
Printer Mode] [SPP Mode] [EPP-1.9 and SPP Mode] [EPP-1.7 and SPP
Mode] [ECP Mode] [ECP and EPP 1.9 Mode] [ECP and EPP 1.7 Mode]
NCT5104DSEC Super IO Configuration
Serial Port 5/6/7/8 Configuration
Serial Port
Allows you to enable or disable the serial port (COM).Conguration options:
[Disabled] [Enabled]