User Guide

48
LED projector E-Manual
Network
This option allows you to turn on or o the network while your
LED projector is powered o.
Status
Your current network status.
DHCP
This option allows you to turn on or o the DHCP settings.
On: The IP address and Subnet Mask are assigned by your network
automatically.
O: Set the IP address and Subnet Mask manually.
Apply
After entering the IP address or Subnet Mask manually, select
Apply, then select Yes to save the changes.
MAC Address
The current MAC address of your LED projector. (This projector
supports two remote control systems: RoomView and X-Panel.)
• Network - This option allows you to congure the network
settings.
NOTE: The sub-menu is only available when a network cable is
connected to your LED projector.