Specifications
ASUS H97-PRO
3-41
Chapter 3
CPU Upper Temperature [70]
Use the <+> or <-> keys to adjust the upper limit of the CPU temperature.
The values range from 25°C to 75°C.
CPU Fan Max. Duty Cycle(%) [100]
Use the <+> or <-> keys to adjust the maximum CPU fan duty cycle. The
values range from 20% to 100%. When the CPU temperature reaches the
upper limit, the CPU fan operates at the maximum duty cycle.
CPU Middle Temperature [25]
Use the <+> or <-> keys to set the value for CPU Middle Temperature. The
range of the values depends on the CPU installed.
CPU Fan Middle Duty Cycle(%) [20]
Use the <+> or <-> keys to adjust the CPU fan middle duty cycle. The
values range from 20% to 100%. When the CPU temperature reaches the
middle value, the CPU fan operates at the middle duty cycle.
CPU Lower Temperature [20]
Use the <+> or <-> keys to adjust the CPU fan’s lower temperature. The
values range from 20% to 75%.
CPU Fan Min. Duty Cycle(%) [20]
Use the <+> or <-> keys to adjust the minimum CPU fan duty cycle. The
values range from 20% to 100%. When the CPU temperature is under
20°C, the CPU fan operates at the minimum duty cycle.
Chassis Fan 1/2/3 Q-Fan Control [DC Mode]
These items allow you to set the chassis fans’ Q-Fan control feature into DC Mode, PWM
Mode, or disable these Q-Fan controls from your motherboard.
Conguration options: [Disabled] [PWM Mode] [DC Mode]
The following items appear only when you set the Chassis Fan 1/2/3 Q-Fan Control to
[PWM Mode] or [DC Mode].
Chassis Fan 1/2/3 Q-Fan Source [CPU]
This item controls the assigned fan according to the selected temperature source.
Conguration options: [CPU] [MB]
Chassis Fan 1/2/3 Speed Low Limit [600 RPM]
This item allows you to disable or set the chassis fan warning speed.
Conguration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
Chassis Fan 1/2/3 Profile [Standard]
This item allows you to set the appropriate performance level of the chassis fan.
[Standard] Set to make the chassis fan adjust automatically depending on the
chassis temperature.
[Silent] Set to minimize the fan speed for quiet chassis fan operation.
[Turbo] Set to achieve maximum chassis fan speed.
[Manual] Set to assign detailed fan speed control parameters.
The following items appear only when you set the Chassis Fan 1/2/3 Prole to [Manual].