Manual

GigaX3124 Layer3 Switch CLI Command Reference
40
4.6 switchport trunk native vlan <1-3000>
Syntax switchport trunk native vlan <1-3000>
Parameters trunk Set 802.1Q trunk mode for the port
native Specify the native VLAN for the port
vlan IEEE 802.1Q Virtual Local Area Networks
<1-3000> VLAN ID
Command Mode Interface conguration mode
No/clear
Show show vlan [VLANID]
Default Default is setting to native vlan 1
Description Set Virtual LAN and the interface to trunk mode
Example ASUS(cong-if)# switchport trunk native vlan 2
4.7 switchport trunk allowed vlan (add|remove)
VLANLIST
Syntax switchport trunk allowed vlan (add|remove) VLANLIST
Parameters trunk Set 802.1Q trunk mode for the port
allowed the allowed VLANs that can receive and send trafc
on this interface in tagged format when in trunk mode
vlan IEEE 802.1Q Virtual Local Area Networks
add Add allowed VLANs to the interface
remove Remove allowed VLANs from the interface
VLANLIST VLAN ID <1-3000> list
Command Mode Interface conguration mode
No/clear switchport trunk allowed vlan remove VLANLIST
Show show vlan [VLANID]
Default