Manual

GigaX3124 Layer3 Switch CLI Command Reference
39
No/clear
Show
Default
Description Use the show vlan user EXEC command to display the param-
eters for all congured VLANs or one VLAN (if the name is speci-
ed) on the switch.
Example ASUS# show vlan name VLAN2
4.4 switchport access vlan <1-3000>
Syntax switchport access vlan <1-3000>
Parameters access Set 802.1Q access mode for the port
vlan IEEE 802.1Q Virtual Local Area Networks
<1-3000> VLAN ID
Command Mode Interface conguration mode
No/clear
Show show vlan [VLANID]
Default
Description Set Virtual LAN and the interface to access mode
Example ASUS(cong-if)# switchport access vlan 2
4.5 switchport mode (access|trunk)
Syntax switchport mode (access|trunk)
Parameters access Set 802.1Q access mode for the port
trunk Set 802.1Q trunk mode for the port
Command Mode Interface conguration mode
No/clear
Show show interface [IFNAME]
Default The default mode is trunk
Description Set the interface to access or trunk mode.
Example ASUS(cong-if)# switchport mode access