Manual

GigaX3124 Layer3 Switch CLI Command Reference
29
3 Portinterfaceconguration:
Type “interface IFNAME” in global conguration mode, then start to congure
interface.
3.1 acceptable frame-type (all| discard-all| vlan-
tagged-only)
Syntax acceptable frame-type (all| discard-all| vlan-tagged-only)
Parameters all Accept all packets
discard-all Discard all packets
vlan-tagged-only Accept VLAN-tagged packets only
Command Mode Interface conguration mode
No/clear
show show interface IFNAME
Default Accept all packets.
Description Use the acceptable frame type conguration command on
the switch stack or standalone switch to set the type of the
acceptable frame, for any kind of frame type is accepted or only
vlan-tag frame is accepted.
Examples ASUS(cong-if)# acceptable frame-type all
3.2 auto-negotiation
Syntax auto-negotiation
Parameters
Command Mode Interface conguration mode
No/clear no auto-negotiation
Show show interface IFNAME
Default The default is enable
Description Use the auto-negotiation conguration command on the switch
stack or standalone switch to set auto-negotiation status of the
port.
Examples ASUS(cong-if)# auto-negotiation