Manual

GigaX3124 Layer3 Switch CLI Command Reference
291
ASUS(cong-router)# neighbor 10.1.1.1 poll-interval 120 priority
10
25.35 network A.B.C.D/M area (A.B.C.D|
<0-4294967295>)
Syntax network A.B.C.D/M area (A.B.C.D| <0-4294967295>)
Parameters A.B.C.D/M OSPF network prex
area OSPF area parameters
A.B.C.D OSPF area ID in IP address format
<0-4294967295> OSPF area ID as a decimal value
(ID 0.0.0.2 equals ID 2)
Command Mode Cong-router mode
No/clear no network A.B.C.D/M area (A.B.C.D| <0-4294967295>)
Show show running-cong
Default
Description To enable OSPF function on the specied network.
Examples ASUS(cong-router)# network 192.168.1.1/24 area 0.0.0.1
25.36 passive-interface IFNAME
Syntax passive-interface IFNAME
Parameters passive-interface Suppress routing updates on an interface
IFNAME Interface name
Command Mode Cong-router mode
No/clear no passive-interface IFNAME
Show show running-cong
Default
Description To set the specied interface as passive inerface.
Examples ASUS(cong-router)# passive-interface vlan2