Manual

GigaX3124 Layer3 Switch CLI Command Reference
289
dead-interval)
Show show ip ospf interface [IFNAME]
Default Hello-interval is 10sec, retransmit-interval is 5 sec, transmit-delay
is 40 sec, dead-interval is 40 sec.
Description Set number of seconds for HelloInterval, RetransmitInterval,
Transmitdelay, DeadInterval timer value.
Examples ASUS(cong-if)# ip ospf hello-interval 15
25.31 ip ospf message-digest-key <1-255> md5 KEY
Syntax ip ospf message-digest-key <1-255> md5 KEY
Parameters <1-255> Key ID
md5 Use MD5 algorithm
KEY Character string, max. 16 characters
Command Mode Interface conguration mode
No/clear no ip ospf message-digest-key <1-255>
Show show running-cong
Default
Description Set OSPF authentication key to a cryptographic password for a
specic IP interface. The cryptographic algorithm is MD5. KEYID
identies secret key used to create the message digest. KEY is
the actual message digest key up to 16 chars.
Examples ASUS(cong-if)# ip ospf message-digest-key
ABCDEFGH12345678
25.32 ip ospf priority <1-255>
Syntax ip ospf priority <1-255>
Parameters <1-255> Priority
Command Mode Interface conguration mode
No/clear no ip ospf priority
Show show ip ospf interface [IFNAME]
Default The default is 1