Manual

GigaX3124 Layer3 Switch CLI Command Reference
264
24 RIPrelatedConguration
24.1 default-information originate
Syntax default-information originate
Parameters originate Distribute a default route
Command Mode Cong-router mode
No/clear no default-information originate
Show show running-cong
Default Not enable
Description Set RIP to distribute the default route of the system.
Examples ASUS(cong-router)# default-information originate
24.2 default-metric <1-16>
Syntax default-metric <1-16>
Parameters <1-16> Metric value
Command Mode Cong-router mode
No/clear no default-metric
Show show ip rip status
Default RIP metric is a value for distance for the network. Usually RIP
daemon increment the metric when the network information is
received. Redistributed routes’ metric is set to 1.
Description This command modies the default metric value for redistributed
routes.
Examples ASUS(cong-router)# default-metric 2
24.3 distance <1-255>
Syntax distance <1-255>
Parameters <1-255> Distance value
Command Mode Cong-router mode