Manual

GigaX3124 Layer3 Switch CLI Command Reference
225
Default
Description To show port-security status for the specied interface.
Examples ASUS# show port-security interface gi1/0/1
19.4 switchport port-security
Syntax switchport port-security
Parameters
Command Mode Interface conguration mode
No/clear no switchport port-security
Show show port-security [IFNAME]
Default Not enable port security
Description To enable port-security of the interface.
Examples ASUS(cong-if)# switchport port-security
19.5 switchport port-security aging-time <0-1440>
Syntax switchport port-security aging-time <0-1440>
Parameters aging-time Age time of port security learnt addresses
<0-1440> Minutes (0 means disabled)
Command Mode Interface conguration mode
No/clear no switchport port-security aging-time
Show show port-security [IFNAME]
Default The default is 0, not aging.
Description To enable port-security aging and set age time of the interface.
Examples ASUS(cong-if)# switchport port-security aging-time 5
19.6 switchport port-security aging-type
(absolute|inactivity)
Syntax switchport port-security aging-type (absolute|inactivity)
Parameters Absolute Absolute aging (default)