Manual
GigaX3124 Layer3 Switch CLI Command Reference
220
to return to the default setting.
Example ASUS(cong-if)# dot1x reauthentication
18.7 dot1x system-auth-control
Syntax dot1x system-auth-control
Parameters system-auth-control enabled 802.1X globally
Command Mode Global conguration mode
No/clear no dot1x system-auth-control
Show show dot1x / show running-cong
Default The default is global disable
Description Use the dot1x system-auth-control global conguration command
on the switch stack or on a standalone switch to globally enable
802.1X. Use the no form of this command to return to the default
setting.
Example ASUS(cong)# dot1x system-auth-control
18.8 dot1x timeout (reauth-period| quiet-period|
server-timeout) TIMEVALUE
Syntax dot1x timeout (reauth-period| quiet-period| server-timeout)
TIMEVALUE
Parameters reauth-period the period between re-authentication attempts
quiet-period the time to retain in quiet state after
authentication failure
server-timeout the time to wait for an authentication server
response
TIMEVALUE: 1~65535 seconds
Command Mode Interface conguration mode
No/clear no dot1x timeout (quiet-period| reauth-period| server-timeout)
Show show dot1x / show dot1x interface IFNAME
Default reauth-period: 3600 seconds