Manual

GigaX3124 Layer3 Switch CLI Command Reference
217
18 Port based Network Access
 ControlConguration:
18.1 dot1x guest-vlan <1-3000>
Syntax dot1x guest-vlan <1-3000>
Parameters <1-3000> valid vlan-id range is from 1 to 3000
Command Mode Interface conguration mode
No/clear no dot1x guest-vlan
Show show dot1x / show dot1x interface IFNAME
Default No default guest vlan
Description Use the dot1x guest-vlan interface conguration command
on the switch stack or on a standalone switch to specify an
active VLAN as an 802.1X guest VLAN. Use the no form of this
command to return to the default setting.
Example ASUS(cong)# interface gi1/0/1
ASUS(cong-if)# dot1x guest-vlan 2
18.2 dot1x port-control (auto| force-authorized|
force-unauthorized)
Syntax dot1x port-control (auto| force-authorized| force-unauthorized)
Parameters auto Enables 802.1x port-based authentication and causes the
port to begin in the unauthorized state, allowing only
EAPOL frames to be sent and received through the port
force-authorized Disables 802.1x port-based authentication
and causes the port to transition to the authorized state
without any authentication exchange required
force-unauthorized Causes the port to remain in the
unauthorized state, ignoring all attempts by the client
to authenticate