Manual
GigaX3124 Layer3 Switch CLI Command Reference
216
Show show spanning-tree summary
Default The default is 3 seconds.
Description Use the spanning-tree transmission-limit conguration command
on the switch stack or standalone switch to set the spanning-tree
transmission of consecutive spanning-tree BPDUs
Example ASUS(cong)# spanning-tree transmission-limit 10
17.26 spanning-tree uplink-fast
Syntax spanning-tree uplink-fast
Parameters
Command Mode Global conguration mode
No/clear no spanning-tree uplink-fast
Show show spanning-tree summary
Default Not enable
Description Accelerate the root port transitions to the forwarding state
Example ASUS(cong)# spanning-tree uplink-fast