Manual

GigaX3124 Layer3 Switch CLI Command Reference
215
Parameters port-priority the port priority
<0-240> Priority value, in steps of 16
Command Mode Interface conguration mode
No/clear no spanning-tree port-priority
Show show spanning-tree interface [IFNAME]
Default The default is 128
Description Use the spanning-tree port-priority conguration command on
the switch stack or standalone switch to set the spanning-tree
the port priority between 0 and 240.
Example ASUS(cong-if)# spanning-tree port-priority 64
17.24 spanning-tree priority <0-61440>
Syntax spanning-tree priority <0-61440>
Parameters priority STP bridge priority
<0-61440> valid range is 0 to 61440 in increments of 4096
Command Mode Global conguration mode
No/clear no spanning-tree priority
Show show spanning-tree summary
Default The default is 32768
Description Use the spanning-tree priority conguration command on the
switch stack or standalone switch to set the spanning-tree bridge
priority.
Example ASUS(cong)# spanning-tree priority 61440
17.25 spanning-tree transmission-limit <1-10>
Syntax spanning-tree transmission-limit <1-10>
Parameters transmission-limit the minimum interval between the
transmission of BPDUs
<1-10> BPDU transmission limit, in seconds
Command Mode Global conguration mode
No/clear no spanning-tree transmission-limit