Manual

GigaX3124 Layer3 Switch CLI Command Reference
211
17.13 spanning-tree link-type (auto| point-to-point|
shared)
Syntax spanning-tree link-type (auto| point-to-point| shared)
Parameters auto Automatically determine on linkup
point-to-point Link connected with exactly only one bridge
shared Link connected with more than one bridge
Command Mode Interface conguration mode
No/clear no spanning-tree link-type
Show show spanning-tree interface [IFNAME]
Default The default is auto.
Description Use the spanning-tree link-type conguration command on the
switch stack or standalone switch to set the spanning-tree link
type for the specied interface.
Example ASUS(cong-if)# spanning-tree link-type shared
17.14 spanning-tree max-age <6-40>
Syntax spanning-tree max-age <6-40>
Parameters <6-40> Max age value, in seconds
Command Mode Global conguration mode
No/clear No spanning-tree max-age
Show show spanning-tree summary
Default 20 sec
Description Use the spanning-tree max-age conguration command on
the switch stack or standalone switch to set the spanning-tree
interval (sec) between messages the spanning tree receive.
Example ASUS(cong)# spanning-tree max-age 25
17.15 spanning-tree mode (mst| pvst| rapid-pvst)
Syntax spanning-tree mode (mst| pvst| rapid-pvst)
Parameters mst Multiple Spanning-Tree (IEEE 802.1s)