Manual

GigaX3124 Layer3 Switch CLI Command Reference
195
15 QoS/CoS:
15.1 cos cos-map <0-7> <1-8>
Syntax cos cos-map <0-7> <1-8>
Parameters <0-7> IEEE 802.1p priority
<1-8> Class of Service (CoS) Priority Queue ID
Command Mode Global conguration mode
No/clear no cos cos-map
Show show cos cos-map
Default
Description Use the queue cos-map conguration command on the switch
stack or standalone switch to set which Cos queue a given
priority should map into.
Example ASUS(cong)# cos cos-map 3 1
15.2 cospolicyfo
Syntax cos policy fo
Parameters fo First In First Out
Command Mode Global conguration mode
No/clear no cos policy
Show show cos policy
Default The default setting of qos ploicy is strict mode
Description This command sets CoS scheduling policy to First In First Out
mode
Example ASUS(cong )# cos policy fo