Manual
GigaX3124 Layer3 Switch CLI Command Reference
191
<0-255> ICMP message type
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear No (permit|deny) icmp host IPADDR any [<0-255>] [IFNAME]
Show show access-lists [ACLNAME]
Default
Description This command species one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(cong-ext-acl)# permit icmp host 10.0.0.1 any 2 [gi1/0/1]
13.118 (permit|deny) icmp host IPADDR host
IPADDR [<0-255>] [IFNAME]
Syntax (permit|deny) icmp host A.B.C.D host A.B.C.D [<0-255>]
[IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
icmp Internet Control Message Protocol
host A single source host
IPADDR Source address
host A single destination host
IPADDR Destination address
<0-255> ICMP message type
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear no (permit|deny) icmp host IPADDR host IPADDR [<0-255>]
[IFNAME]
Show show access-lists [ACLNAME]
Default
Description This command species one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(cong-ext-acl)# permit icmp host 10.0.0.1 host 10.0.0.2 2
[gi1/0/1]