Manual
GigaX3124 Layer3 Switch CLI Command Reference
180
Show show access-lists [ACLNAME]
Default
Description This command species one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(cong-ext-acl)# permit tcp any eq 2 host 10.0.0.2 [gi1/0/1]
13.103 (permit|deny) (tcp|udp) any host
IPADDR [eq] [<0-65535>] [IFNAME]
Syntax (permit|deny) (tcp|udp) any host IPADDR [eq] [<0-65535>]
[IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
ip Any Internet Protocol
tcp Transmission Control Protocol
udp User Datagram Protocol
icmp Internet Control Message Protocol
any any source address
host A single destination host
IPADDR Destination address
eq Match only packets on a given port numbe
<0-65535> Port number
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear no (permit|deny) (tcp|udp) any host IPADDR [eq] [<0-65535>]
[IFNAME]
Show show access-lists [ACLNAME]
Default
Description This command species one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(cong-ext-acl)# permit tcp any host 10.0.0.2 eq 2 [gi1/0/1]