Manual
GigaX3124 Layer3 Switch CLI Command Reference
166
13.85 (permit|deny) icmp IPADDR MASK host
IPADDR <0-255> code <0-255> [IFNAME]
Syntax (permit|deny) icmp IPADDR MASK host IPADDR <0-255> code
<0-255> [IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
icmp Internet Control Message Protocol
IPADDR Source address
MASK Source wildcard bits
host A single destination host
IPADDR Destination address
<0-255> ICMP message type
<0-255> ICMP message code
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear no (permit|deny) icmp IPADDR MASK host IPADDR <0-255>
code <0-255> [IFNAME]
Show show access-lists [ACLNAME]
Default
Description This command species one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(cong-ext-acl)# permit icmp 10.0.0.1 0.0.0.0 host 10.0.0.2
1 code 1 [gi1/0/2]
13.86 (permit|deny) (ip|tcp|udp|icmp) any host
IPADDR [IFNAME]
Syntax (permit|deny) (ip|tcp|udp|icmp) any host A.B.C.D [IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
ip Any Internet Protocol