Manual
GigaX3124 Layer3 Switch CLI Command Reference
154
Command Mode IP extended access-list mode
No/clear no (permit|deny) icmp IPADDR MASK any [<0-255>] code
[<0-255>] [IFNAME]
Show show access-lists [ACLNAME]
Default
Description This command species one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(cong-ext-acl)# permit icmp 10.0.1.0 0.0.0.255 any 12
code 12 [gi1/0/1]
13.71 (permit|deny) (ip|tcp|udp|icmp) host IPADDR
any [IFNAME]
Syntax (permit|deny) (ip|tcp|udp|icmp) host IPADDR any [IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
ip Any Internet Protocol
tcp Transmission Control Protocol
udp User Datagram Protocol
icmp Internet Control Message Protocol
host A single source host
IPADDR Source address.
any any destination address
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear no (permit|deny) (ip|tcp|udp|icmp) host IPADDR any [IFNAME]
Show show access-lists [ACLNAME]
Default
Description This command species one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(cong-ext-acl)# permit ip host 10.0.0.1 any [gi1/0/1]