Manual

GigaX3124 Layer3 Switch CLI Command Reference
113
13.23 access-list (<100-199>|<2000-2699>)
(deny|permit) (tcp|udp) host IPADDR [eq]
[<0-65535>] host IPADDR [eq] [<0-65535>]
[IFNAME]
Syntax access-list (<100-199>|<2000-2699>) (deny|permit) (tcp|udp)
host IPADDR [eq] [<0-65535>] host IPADDR [eq] [<0-65535>]
[IFNAME]
Parameters access-list Add an access list entry
<100-199> Extended IP access-list number
<2000-2699> Extended IP access-list number (expanded
range)
permit Specify packets to forward
deny Specify packets to reject.
tcp Transmission Control Protocol
udp User Datagram Protocol
host A single Source host
IPADDR Source address
eq Match only packets on a given port numbe
<0-65535> Port number
host A single destination host
IPADDR Destination address
eq Match only packets on a given port numbe
<0-65535> Port number
[IFNAME] Egress interface name
Command Mode Global conguration mode
No/clear no access-list (<100-199>|<2000-2699>) (deny|permit) (tcp|udp)
host IPADDR [eq] [<0-65535>] host IPADDR [eq] [<0-65535>]
[IFNAME]
Show show access-lists [ACLNAME]
Default