User Manual

GigaX Series L2 Managed Switch User Guide
69
5.1.2 Boot ROM Commands
Type “?” in the boot mode to display the valid commands list.
Table 7. Boot ROM commands
Command Parameters Usage Notes
a NONE or MAC
address
Configure MAC address
c IP address Configure TFTP client IP
address
g NONE Load and execute firmware
h NONE Display online help
m mask Configure network mask You have to set up the
terminal emulator with
the same baud rate to
make the work
p NONE Display current
configuration
I
R NONE System reboot
s IP address Configure TFTP server IP
address
t NONE Toggle safe mode
u File name Upload boot
module/firmware via
network using TFTP
protocol
v NONE Display boot rom version
w NONE Toggle administrator
password reset