Owner's manual

Chapter 5 - Command Line Interface

CLI Syntax

: no mac-address-table multicast MACADDR VLANID

IFLIST

Example

: (cong)# no mac-address-table multicast 0100.5e11.1111 2

gi1/0/1-3

5.3.10.3 show mac-address-table multicast

User executes the command to display the Layer 2 multicast entries for

all VLANs. Use the command in privileged EXEC mode to display specic

multicast entries.

CLI Syntax

: show mac-address-table multicast

Example

: ASUS# show mac-address-table multicast

5.3.11 IGMP Snooping

5.3.11.1 ip igmp snooping

This command sets the IGMP snooping function enabled globally.

CLI Syntax

: ip igmp snooping

Example

: (cong)# ip igmp snooping

5.3.11.2 interval time

This command sets the interval time for the IGMP queries sent by switch.

CLI Syntax

: ip igmp snooping last-member-query-interval TIMEVALUE

Example

: (cong)# ip igmp snooping last-member-query-interval 100

5.3.12 DHCP Snooping

5.3.12.1 ip dhcp snooping

This command sets the DHCP snooping function enabled globally.

CLI Syntax

: ip dhcp snooping

Example

: (cong)# ip dhcp snooping