Owner's manual

60
Chapter 4 - Conguration Management
ASUS GigaX2124
Authentication Control: If force-authorized is selected, the selected
port is forced authorized. Thus, trafc from all hosts is allowed to
pass. Otherwise, if force-unauthorized is selected, the selected port is
blocked and no trafc can go through. If auto is selected, the behavior
of the selected port is controlled by 802.1x protocol. All ports should
be set to Auto under normal conditions.
Reauthentication
: Once enabled, the switch will try to authenticate
the port user again when the re-authentication time is up.
ReAuthentication Time
: If Reauthentication is enabled, this is the
time period the switch uses to re-send authentication request to the
port user (see above).
Quiet Period
: If authentication failed, the switch waits upon this time
period before sending another authentication request to the port user.
Guest Vlan
: Specify a guest VLAN to clients that are not 802.1x-
capable.
Click
OK
to make the settings effective. Click
Modify
to refresh the
settings to current value.
Figure 64. Port Access Control