Owner's manual
49
Chapter 4 - Conguration Management
ASUS GigaX2124
Provide four criteria and three take actions for rule setting:
Match Criterion: Chose one of IP DSCP with range, IP Precedence
with range, ACL name with an exist lter access-list, None for criteria.
Prole Action: Chose one of Police Drop, Police High-Drop, None
for action.
In-Prole Action: Chose Cos Override with COS value, Mark IP
SCP, Mark IP Precedence or None to take action on incoming
packets.
Out-Prole Action: Choose Drop, IP DSCP or None for transmitting
packets and also can set Rate and Burst Size.
Figure 50. Policy Map Class
4.8.13.2 Policy Attach
A policy map set is idle if you did not attach it to any port. Use the Policy
Attach page to attach a lter set to ingress ports.
Chose an exist policy map set, then click ports want to apply.
Click
OK
to make the settings effective. Click
Reload
to refresh the
settings to current value.