Owner's manual
45
Chapter 4 - Conguration Management
ASUS GigaX2124
Edit the following attributes as needed:
Joint Timer: Set value in centiseconds.
Leave Timer: Set value in centiseconds.
LeaveAll Timer: Set value in centiseconds.
Click
OK
to make the settings effective. Click
Reload
to refresh the
settings to current value.
Figure 45. GARP Timer
4.8.12 QoS and CoS
4.8.12.1 802.1p Priority
Eight egress queues on all switch ports. These queues can either be
congured with the Weighted Round Robin (WRR) scheduling algorithm or
congured with one queue as a strict priority queue and the other queues
for WRR. The strict priority queue must be empty before the other queues
are serviced. You can use the strict priority queue for mission-critical and
time-sensitive trafc. There are three options:
First Come First Service: The rst come frame has the highest
priority
High Priority First
: Packet’s priority depends on its CoS value