Owner's manual

• Enterprise MIB for PSU, fan, and system temperature, voltage

• Telnet or SSH2 remote login

• FTP for firmware update and configuration backup

• IEEE 802.1x authentication (with dynamic VLAN assignment)

• DHCP snooping

• Syslog

• Command Line Interpreter through console, telnet and SSH

• Web GUI

• LEDs for port link status

• LEDs system, redundant power supply (RPS), and fan status

1.2 Conventions used in this document

1.2.1 Notations

• Acronyms are defined the first time they appear in text and in the

glossary.

• For brevity, the GigaX switch is referred to as “the switch.”

• The terms LAN and network are used interchangeably to refer to a

group of Ethernet-connected computers at one site.

• The illustrations and web interface screens refer to both the GigaX 2048

and GigaX 2024 models, except otherwise indicated.

1.2.2 Typography

• Italics are used to present the parameters for the command line

interpreter.

• Boldface type text is used for items you select from menus and

drop-down lists, and text strings you type when prompted by the

program.