Manual

2
GigaX2024/2048 L2 Managed Switch User Manual
• Enterprise MIB for PSU, fan, and system temperature, voltage
• Telnet or SSH2 remote login
• FTP for firmware update and configuration backup
• IEEE 802.1x authentication (with dynamic VLAN assignment)
• DHCP snooping
• Syslog
• Command Line Interpreter through console, telnet and SSH
• Web-based Graphic User Interface (GUI)
• LEDs for port link status
• LEDs for system, redundant power supply (RPS), and fan status
1.2 Conventions used in this document
1.2.1 Notations
• Acronyms are defined the first time they appear in text and in the glossary.
• For brevity, the GigaX2024/2048 switch is referred to as “the switch.”
• The terms LAN and network are used interchangeably to refer to a group of
Ethernet-connected computers at one site.
• The illustrations and web interface screens refer to both the GigaX 2048 and
GigaX 2024 models, except otherwise indicated.
1.2.2 Typography
Boldface
type text is used for items you select from menus and drop-down
lists, and text strings you type when prompted by the program.
1.2.3 Symbols
This document uses the following icons to call your attention to specific
instructions or explanations.
Provides clarification or additional information on the current
topic.
Explains terms or acronyms that may be unfamiliar to many
readers. These terms are also included in the Glossary.
Provides messages of high importance, including messages
relating to personal safety or system integrity.
Note
Definition
Warning