Instruction Manual

show management
This command displays the client IP addresses that are allowed management
access to the switch through various protocols.
Syntax
show management {all-client | http-client | snmp-client | telnet-client}
• all-client - Adds IP address(es) to the SNMP, Web and Telnet groups.
t - Adds IP address(es) to the Web group.
t-client - Adds IP address(es) to the Telnet group.
Glo
• http-clien
• snmp-client - Adds IP address(es) to the SNMP group.
• telne
Command Mode
bal Configuration
Example
4-31