Instruction Manual

Default Setting
•
• Te
Com
n
Command Usage
tected within the timeout interval, the session is kept open;
otherwise the session is terminated.
lies to both the local console and Telnet connections.
out restores the default setting.
CLI: Disabled (0 seconds)
lnet: 600 seconds
mand Mode
Line Configuratio
• If user input is de
• This command app
• The timeout for Telnet cannot be disabled.
• Using the command without specifying a time
Example
Related Commands
silent-time (4-21)
exec-timeout (4-14)
exec-timeout
This command se
Use form to restore the default.
ts the interval that the system waits until user input is detected.
Telnet: 10 minutes
input is detected within the timeout interval, the session is kept open;
is terminated.
s to both the local console and Telnet connections.
r Telnet cannot be disabled.
and without specifying a timeout restores the default setting.
inutes, enter this command:
the no
Syntax
exec-timeout [seconds]
no exec-timeout
seconds - Integer that specifies the number of seconds.
(Range: 0-65535 seconds; 0: no timeout)
tting Default Se
CLI: No timeout
Command Mode
Line Configuration
Command Usage
r• If use
otherwise the session
d applie• This comman
• T ut fohe timeo
• Using the comm
Example
timeout to two mTo set the
Related Commands
silent-time (4-21)
4-15