Instruction Manual

Mapping IP Port Priority
of Service values based on the
i.e., TCP/UDP port number) in the frame header. Some of the
ommon TCP service ports include: HTTP: 80, FTP: 21, Telnet: 23 and
riority Status – Enables or disables the IP port priority.
/UDP) – Set a new IP port number.
• lass of Service Value – Sets a CoS value for a new IP port. Note that “0”
represents low priority and “7” represent high priority.
IP Port Priority settings apply to all interfaces.
Web – Click Priority, IP Port Priority Status. Set IP Port Priority Status to Enabled.
You can also map network applications to Class
IP port number (
more c
POP3: 110.
Command Attributes
• IP Port P
• IP Port Priority Table – Shows the IP port to CoS map.
• IP Port Number (TCP
C
Note:
Figure 3-79 IP Port Priority Status
3-132