Instruction Manual

- Untagged: Interface is a member of the VLAN. All packets transmitted by the

as an untagged port.

- Forbidden: Interface is forbidden from automatically joining the VLAN via GVRP.

For more information, see “Automatic VLAN Registration” on page

3-145.

h this

f a trunk. To add a trunk to the

selected VLAN, use the last table on the VLAN Static Table page.

.1Q VLAN, Static Table. Select a VLAN ID from the

and status if required. Select the

membership type by marking the appropriate radio button in the list of ports or

port will be untagged, that is, not carry a tag and therefore not carry VLAN o

CoS information. Note that an interface must be assigned to at least one gro

- None: Interface is not a member of the VLAN. Packets associated wit

VLAN will not be transmitted by the interface.

• Trunk Member – Indicates if a port is a member o

Web – Click VLAN, 802

scroll-down list. Modify the VLAN name

trunks. Click Apply.

Figure 3-64. Configuring a VLAN Static Table

CLI – The following example adds tagged and untagged ports to VLAN 2.

3-112