Instruction Manual

Figure 3-61. Displaying Basic VLAN Information
CLI – Enter the following command.
Displaying Current VLANs
The VLAN Current Table shows the current port members of each VLAN and
whether or not the port supports VLAN tagging. Ports assigned to a large VLAN
group that crosses several switches should use VLAN tagging. However, if you
just want to create a small port-based VLAN for one or two switches, you can
disable tagging.
Command Attributes (Web)
• VLAN ID – ID of configured VLAN (1-4094).
• Up Time at Creation – Time this VLAN was created (i.e., System Up Time).
• Status – Shows how this VLAN was added to the switch.
s.
N, 802.1Q VLAN, Current Table. Select any ID from the
- Dynamic
- ermanent: Added as a static entry.
GVRP: Automatically learned via GVRP.
P
• Egress Ports – Shows all the VLAN port member
• Untagged Ports – Shows the untagged VLAN port members.
eb – Click VLAW
scroll-down list.
3-108