Manual

GigaX2024B/M L2 Managed Switch CLI Manual
47
Command Mode
Congure terminal mode
No/clear
No spanning-tree max-age
Show
show spanning-tree port detail IFNAME
Default
20 sec
Description
Use the spanning-tree max-age conguration command on
the switch stack or standalone switch to set the spanning-tree
interval (sec) between messages the spanning tree receive.
Example
ASUS(cong)# spanning-tree max-age 20
10.35 spanning-tree port-priority <0-240>
Syntax
spanning-tree port-priority <0-240>
Parameters
port-priority the port priority
<0-240> Number from 0 to 240, in increments of 16
Command Mode
Interface mode
No/clear
no spanning-tree port-priority
Show
show spanning-tree port detail IFNAME
Default
None or depends on ODM customer
Description
Use the spanning-tree port-priority conguration command
on the switch stack or standalone switch to set the spanning-tree
the port priority between 0 and 240.
Example
ASUS(cong-if)# spanning-tree port-priority 128
10.36 spanning-tree priority <0-61440>
Syntax
spanning-tree priority <0-61440>
Parameters
priority the switch priority
<0-61440> valid range is 0 to 61440 in increments of
4096
Command Mode
Congure terminal mode
No/clear
No spanning-tree priority
Show
show spanning-tree port detail IFNAME
Default
32768